Togu Audio Line TAL-Mod v1.5.9 [WiN-OSX]

Publisher: TAL (Togu Audio Line) Software
Product: TAL-Mod
Version: 1.5.9 Incl Keygen-R2R
Formats: VST2, VST3, AU
Requirements: Windows 7 or higher, macOS 10.9 or higher
  • Publisher: TAL (Togu Audio Line) Software
  • Product: TAL-Mod
  • Version: 1.5.9 Incl Keygen-R2R
  • Formats: VST2, VST3, AU
  • Requirements: Windows 7 or higher, macOS 10.9 or higher

TAL-Mod is a virtual analog synthesizer with an exceptional sound and almost unlimited modulation possiblities. Its special oscillator model is able to create a wide range of sounds, from classic mono to rich stereo leads, effects and pads.

Routings can be done with virtual patch cables. Just connect a modulation output with a modulation target. After that it’s possible to adjust the intensity of the modulation. You don’t need to be a modular expert. The plug-in is suitable for beginners and experts!

TAL-MOD FEATURES

  • 3 oscillators with optional saw, pulse, triangle and sine waveforms.
  • 1 additional noise oscillator with adjustable color.
  • 2 high quality analog sounding resonance filters with different modes (LP, HP, Notch, All Pass, BP).
  • Different filter routing possiblities (parallel and serial). With the possiblity to choose the oscillator sources.
  • Full stereo signal path.
  • FM / RingMode support.
  • 2 oscillators support hard sync for saw, pulse, triangle waveforms.
  • Create stereo sounds and rich harmonics with additional oscillators (up to 7 sound generators per oscillator for osc I and osc II).
  • 2 lfo’s with different waveforms, sync, trigger, unipolar modes and the possibility to modulate the rate.
  • 3 adsr’s.
  • Modulation envelope with spline or optional step mode. Trigger and host sync mode.
  • Almost unlimited modulation possibilities with patch cable routing.
  • Optional sequencer or arpeggiator.
  • Basic effects: high pass filter, chorus, eq, reverb and delay.
  • Mono and polyphonic mode.
  • Microtuning support.
  • Resizable UI.
  • You choose your favorite UI colors.
  • And a lot more…

CHANGE LOG

  • Version 1.5.9
    • Hard sync to sub osc with wave sine fixed.
  • Version 1.5.8
    • Too many stereo outputs fixed.
    • Colored noise as modulation source added.
    • Hard sync for sine added.
  • Version 1.5.6
    • LFO MONO mode added (one lfo for all voices).
    • Negative LFO rate not possible anymore.
    • Framework update.
  • Version 1.5.4
    • MPE Pressure fixed.
  • Version 1.5.2
    • MPE Timbre / Slide now isn’t bipolar anymore.
    • Modulation snap feature fixed.
  • Version 1.5.2
    • Minor bug fixes.
    • UI improvements.
  • Version 1.5.1
    • Mod wheel not working fixed.
  • Version 1.5.0
    • MPE support added.
    • UI updated.
    • Snap feauture for modulation depth added (the “s” button).
  • Compatibility mode added for automation compatibility with version smaller 1.4.0 and reversed effect order (v 1.4.2)
  • Bug fixes (v 1.4.2)
  • Bug fixes (v 1.4.0)
  • More resonance also at higher cutoff frequencies (v 1.4.0)
  • Increased cutoff range (to make sure the filter is full open when cutoff at max) (v 1.4.0)
  • Added some small amount of instability to the oscillators to get a more natural sound (v 1.4.0)
  • Reverb after delay (v 1.3.6)
  • Added triples and dot sequencer and modulation envelope speeds (v 1.3.6)
  • Only show manual parameter changes on display (v 1.3.5)
  • Bug fixes (v 1.3.4)
  • Bug fixes / info screen position changed (v 1.3.3)
  • Combo box values issue fixed (v 1.3.2)
  • VST3 plug-in format added (v 1.3.0)
  • Framework update. Better support for windows high resolution screens (v 1.3.0)
  • Pulse hard sync improved (v 1.3.0)
  • UI updates and bug fixes (v 1.2.2)
  • Framework update and bug fixes (v 1.1.8)
  • Improved more natural volume PAN (v 1.1.7)
  • LFO SLEW added for smooth transitions(SH, SAW, Rectangle) (v 1.1.7)
  • Improved ADSR scaling (v 1.1.6)
  • Minor bug fixes (v 1.1.5)
  • Improved ADSR range (v 1.1.5)
  • Velocity intensity knob with different scalings added (v 1.1.4)
  • Delay time automation fixed (v 1.1.3)
  • Step Sequencer with velocity zero fixed (v 1.1.2)
  • Velocity at zero disables velocity for portamento free legato mode (v 1.1.2)
  • OSC 3 sine hard sync trigger fixed (v 1.1.1)
  • Arpeggiator modes UP and DOWN added (v 1.1.1)
  • Delete routings in patching dialogs added (v 1.0.1)
  • New factory presets (v 1.0.1)
  • Improved envelopes -> Attack & Decay (v 1.0.1)
  • Arp / Seq tempo bug fixed (v 1.0.8)
  • Better UI performance (v 1.0.7)
  • CPU spikes on Windows fixed (v 1.0.7)
  • Microtuning fix (v 1.0.7)
  • Decay shape knob added (v 1.0.6)
  • Bug fixes (v 1.0.6)
  • Key-stealing – optional analoge type mode (v 1.0.5)
  • Bug fixes (v 1.0.5)
  • Fixes a bug where no note is playing when voice stealing is active (v 1.0.4)
  • No voice stealing when free voices are available and playing the same note again (v 1.0.3)
  • UI ADSR sliders width increased (v 1.0.3)
  • Mod envelope view when disable UNIPOLAR fixed (v 1.0.3)
  • ADSR release improved -> CPU (v 1.0.3)
  • Note skipping under some conditions fixed (v 1.0.3)
  • More factory presets (v 1.0.2)
  • Bug fixes (v 1.0.2)
  • Different and cleaner note stealing (v 1.0.2)
  • Keyboard tracking added (v 1.0.2)
  • ADSR slider behavior optimized (v 1.0.2)
  • Another ADSR added (v 1.0.2)
  • Smoother ADSR release (v 1.0.2)
  • MIDI timing issue fixed (v 1.0.1)
  • Bug when releasing note in mono (1 voice) mode fixed (v 1.0.1)
  • Lock feature fixed (v 1.0.0)
  • Change sustain while playing fixed (v 1.0.0)
  • OS X installer updated (v 0.9.9)
  • Dragging cables with right mouse button directly shows modulation amount dialog (v 0.9.9)
  • Slow attack with overlapping notes fixed (v 0.9.9)
  • Zipping noises in filter in some special conditions fixed (v 0.9.9)
  • Possible crash in sequencer fixed (v 0.9.9)
  • Attack / release shape knob added (v 0.9.9)
  • MIDI automation for ADSR added (v 0.9.8)
  • +2 modulator added (v 0.9.8)
  • Negative filter keyfollow added (v 0.9.8)
  • Improved envelope step when drawing near +-1 (v 0.9.8)
  • Copy / Paste for sequencer steps. Get the menu with a click at the step number (v 0.9.8)

Leave a Reply