- Publisher: TAL (Togu Audio Line) Software
- Product: TAL-Mod
- Version: 1.5.9 Incl Keygen-R2R
- Formats: VST2, VST3, AU
- Requirements: Windows 7 or higher, macOS 10.9 or higher
TAL-Mod is a virtual analog synthesizer with an exceptional sound and almost unlimited modulation possiblities. Its special oscillator model is able to create a wide range of sounds, from classic mono to rich stereo leads, effects and pads.
Routings can be done with virtual patch cables. Just connect a modulation output with a modulation target. After that it’s possible to adjust the intensity of the modulation. You don’t need to be a modular expert. The plug-in is suitable for beginners and experts!
TAL-MOD FEATURES
- 3 oscillators with optional saw, pulse, triangle and sine waveforms.
- 1 additional noise oscillator with adjustable color.
- 2 high quality analog sounding resonance filters with different modes (LP, HP, Notch, All Pass, BP).
- Different filter routing possiblities (parallel and serial). With the possiblity to choose the oscillator sources.
- Full stereo signal path.
- FM / RingMode support.
- 2 oscillators support hard sync for saw, pulse, triangle waveforms.
- Create stereo sounds and rich harmonics with additional oscillators (up to 7 sound generators per oscillator for osc I and osc II).
- 2 lfo’s with different waveforms, sync, trigger, unipolar modes and the possibility to modulate the rate.
- 3 adsr’s.
- Modulation envelope with spline or optional step mode. Trigger and host sync mode.
- Almost unlimited modulation possibilities with patch cable routing.
- Optional sequencer or arpeggiator.
- Basic effects: high pass filter, chorus, eq, reverb and delay.
- Mono and polyphonic mode.
- Microtuning support.
- Resizable UI.
- You choose your favorite UI colors.
- And a lot more…
CHANGE LOG
- Version 1.5.9
- Hard sync to sub osc with wave sine fixed.
- Version 1.5.8
- Too many stereo outputs fixed.
- Colored noise as modulation source added.
- Hard sync for sine added.
- Version 1.5.6
- LFO MONO mode added (one lfo for all voices).
- Negative LFO rate not possible anymore.
- Framework update.
- Version 1.5.4
- MPE Pressure fixed.
- Version 1.5.2
- MPE Timbre / Slide now isn’t bipolar anymore.
- Modulation snap feature fixed.
- Version 1.5.2
- Minor bug fixes.
- UI improvements.
- Version 1.5.1
- Mod wheel not working fixed.
- Version 1.5.0
- MPE support added.
- UI updated.
- Snap feauture for modulation depth added (the “s” button).
- Compatibility mode added for automation compatibility with version smaller 1.4.0 and reversed effect order (v 1.4.2)
- Bug fixes (v 1.4.2)
- Bug fixes (v 1.4.0)
- More resonance also at higher cutoff frequencies (v 1.4.0)
- Increased cutoff range (to make sure the filter is full open when cutoff at max) (v 1.4.0)
- Added some small amount of instability to the oscillators to get a more natural sound (v 1.4.0)
- Reverb after delay (v 1.3.6)
- Added triples and dot sequencer and modulation envelope speeds (v 1.3.6)
- Only show manual parameter changes on display (v 1.3.5)
- Bug fixes (v 1.3.4)
- Bug fixes / info screen position changed (v 1.3.3)
- Combo box values issue fixed (v 1.3.2)
- VST3 plug-in format added (v 1.3.0)
- Framework update. Better support for windows high resolution screens (v 1.3.0)
- Pulse hard sync improved (v 1.3.0)
- UI updates and bug fixes (v 1.2.2)
- Framework update and bug fixes (v 1.1.8)
- Improved more natural volume PAN (v 1.1.7)
- LFO SLEW added for smooth transitions(SH, SAW, Rectangle) (v 1.1.7)
- Improved ADSR scaling (v 1.1.6)
- Minor bug fixes (v 1.1.5)
- Improved ADSR range (v 1.1.5)
- Velocity intensity knob with different scalings added (v 1.1.4)
- Delay time automation fixed (v 1.1.3)
- Step Sequencer with velocity zero fixed (v 1.1.2)
- Velocity at zero disables velocity for portamento free legato mode (v 1.1.2)
- OSC 3 sine hard sync trigger fixed (v 1.1.1)
- Arpeggiator modes UP and DOWN added (v 1.1.1)
- Delete routings in patching dialogs added (v 1.0.1)
- New factory presets (v 1.0.1)
- Improved envelopes -> Attack & Decay (v 1.0.1)
- Arp / Seq tempo bug fixed (v 1.0.8)
- Better UI performance (v 1.0.7)
- CPU spikes on Windows fixed (v 1.0.7)
- Microtuning fix (v 1.0.7)
- Decay shape knob added (v 1.0.6)
- Bug fixes (v 1.0.6)
- Key-stealing – optional analoge type mode (v 1.0.5)
- Bug fixes (v 1.0.5)
- Fixes a bug where no note is playing when voice stealing is active (v 1.0.4)
- No voice stealing when free voices are available and playing the same note again (v 1.0.3)
- UI ADSR sliders width increased (v 1.0.3)
- Mod envelope view when disable UNIPOLAR fixed (v 1.0.3)
- ADSR release improved -> CPU (v 1.0.3)
- Note skipping under some conditions fixed (v 1.0.3)
- More factory presets (v 1.0.2)
- Bug fixes (v 1.0.2)
- Different and cleaner note stealing (v 1.0.2)
- Keyboard tracking added (v 1.0.2)
- ADSR slider behavior optimized (v 1.0.2)
- Another ADSR added (v 1.0.2)
- Smoother ADSR release (v 1.0.2)
- MIDI timing issue fixed (v 1.0.1)
- Bug when releasing note in mono (1 voice) mode fixed (v 1.0.1)
- Lock feature fixed (v 1.0.0)
- Change sustain while playing fixed (v 1.0.0)
- OS X installer updated (v 0.9.9)
- Dragging cables with right mouse button directly shows modulation amount dialog (v 0.9.9)
- Slow attack with overlapping notes fixed (v 0.9.9)
- Zipping noises in filter in some special conditions fixed (v 0.9.9)
- Possible crash in sequencer fixed (v 0.9.9)
- Attack / release shape knob added (v 0.9.9)
- MIDI automation for ADSR added (v 0.9.8)
- +2 modulator added (v 0.9.8)
- Negative filter keyfollow added (v 0.9.8)
- Improved envelope step when drawing near +-1 (v 0.9.8)
- Copy / Paste for sequencer steps. Get the menu with a click at the step number (v 0.9.8)
