Reason RE Ammo 400R Modulation Oscillators [WiN]

Publisher: Reason Studios & Jiggery-Pokery Sound
Product: Ammo 400R Modulation Oscillators
Version: 2.0.0-DECiBEL
Format: Reason Rack Extension
Requirements: You need R2R Reason release and TEAM R2R Reason Rack Extension Cache Builder
  • Publisher: Reason Studios & Jiggery-Pokery Sound
  • Product: Ammo 400R Modulation Oscillators
  • Version: 2.0.0-DECiBEL
  • Format: Reason Rack Extension
  • Requirements: You need R2R Reason release and TEAM R2R Reason Rack Extension Cache Builder

Arm your rack and take Reason modulation to the next level with Ammo’s 136 basic and complex waveforms. With four audio oscillators that can be freely mixed and routed, and a massive frequency range, Ammo features an all-audio rate internal oscillator path suitable for both audio and CV output.

Available in three variants, the single oscillator 100LA, 12 oscillator 1200BR, and the the 400R available here, which includes the full four oscillator Ammo section, a six-stage envelope and a Re-ARM internal routing device.

Designed and built by Reason users with over ten years experience in the software, Ammo provides a set of unique modulation tools, including features never seen before in Reason, including multiple oscillator sync modes, and dual-mode/dual-slope lag controls to independently smooth abrupt voltage changes of the up and down waveform slopes.

Ammo 400R features:

Four audio oscillators
135 preset waveforms provide easy-to-use, predictable but complex modulation curves, and a random stepped wave
Massive native frequency range from 0.001 Hz to 8,372 Hz, plus 31 tempo sync speeds from 32/1 to 1/128T
Select “always on” oscillator output, or retriggered keyboard control, including a built-in 6-stage amp envelope
360° phase adjustment
Invertible waveform depth control
Set portamento time per oscillator with legato – play Ammo like a Theremin!
One-shot mode plays a selected waveform once per gate
Apply a single “Master” rate (Oscillator A) to control rates all other “Slave” oscillators (B, C and D)
Choose from three oscillator synchronisation modes, Hard, Soft Phase or Soft Overlap, to sync slave oscillators to the master oscillator

Voltage Processing Matrix
Add or subtract all four oscillators with each other, individually per oscillator output
Lag controls: for the first time in Reason use separate lag control (slew limit) for the up and/or down stages of the waveform, and choose whether the slew limiting should be linear or logarithmic
Lag controls can be used as low-pass filters
Fine-tune the output level with a master channel output adjustment
Crossfade an oscillator with summed inputs from other oscillators, or select to sum by itself
Positive and negative waveform value indicators for each output
Four CV rate outputs per channel
One audio output per channel

Re-ARM: Remote Analogue Routing Matrix
Quickly set up performance controllers for Pitch Wheel, Mod Wheel, Aftertouch and Expression to major Ammo targets
Use the Internal Routing Matrix to direct up to four sources to two targets each. Includes all the major targets plus deeper control possibilities
Audio rate FM and AM available from the next adjacent oscillator
Adjust the sensitivity of Re-ARM sources to rate modulation – a 7th, one or two octaves, or full range (26 octaves)!
Switch Ammo VPM lag adjustment from linear to logarithmic mode
An “extra” set of four CV inputs and outputs are available

Leave a Reply